新しいページ 1
YEP 30A (2~4S) SBEC Brushless Speed Controller(26g)です。
SBEC付き(4A)です。2〜4セル Li Poに対応します。
ある程度、自分で対応できる方のみ購入お願いします。
メール便で送付できます。
英文マニュアルは、こ
ちらをご覧ください。
Features:
• Powerful 5.5V/4A Switching BEC
• Optional programming card for convenient setup
• Super fine throttle resolution provides first-rate and highly
accurate linearity
• Super smooth adjustable start-up mode
• Constant RPM mode (governor mode)
• 3 steps adjustable normal EMF brake
• High anti-interference capability
• Low voltage cut-off protection with automatic adjustment for
NiCd/NiMH/Li-Ion/LiPo/LiFePO4
• Soft cut-off option at low voltage, slows motor RPM gradual rather
than hard cutoff (LVC)
• Low voltage cut-off can be disabled
• Variable cut-off voltage / cell
• Active free-wheeling circuit allows for unlimited "partial load"
capability
• LED status display
• Adjustable motor timing from 0° to 30°
• Blocked rotation protection (senses a jammed motor and stops motor
rotation)
• Motor reversing from ESC (no need to change ESC/motor wires)
• Over-temperature protection and overload alarm
• Throttle signal lose protection. If the signal is lost for 3 seconds,
the power will automatically cut-off.
• Safe power-on. (Motor will not start until throttle is returned to
lowest position)
***This ESC is compatible with both helicopter and airplane models.***
Specification:
Max Cont Current: 30A
Max Burst Current: 35A for 10 seconds
Input Voltage: 2-4 cells li-XX or 6-12 Ni-MH/Ni-Cd battery
BEC: 5.5V/4A Switching BEC
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 34x24x9mm
Weight: 26g (including wires)
★注)
:出荷前に動作確認は行っておりますが、この商品は海外輸入の激安超特価品のため、初期不良を含め一切の対応
が出来ませんので、予めご承知下さい。
★注): 当店のご利用前に必ずこちらをご確認ください。